 |
1" S Gate Valve
This valve is rated for maximum of 250 PSI for use with water, oil, and air, and 125 PSI steam. The valve should be used where full flow is desirable. Gate valves provide longest service life when used in full, open, or closed position. Nonrising stem. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
400522 |
1" S Gate Valve |
4 |
29.99 |
/ EA |
100-705NL |
|
|
3/4" T&p Relief Valve
Series 100XL temperature and pressure relief valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU (British Thermal Unit)/hr (hour). They feature a bronze body with NPT (nominal pipe thread) male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Series 100XL is ASME (American Society of Mechanical Engineers) rated and CSA (Canadian Standards Association) listed.
View Details
|
461725 |
3/4" T&p Relief Valve |
2 |
44.99 |
/ CD |
100XL-150 |
|
|
3/4" Check Valve
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
459328 |
3/4" Check Valve |
2 |
19.99 |
/ EA |
101-004NL |
|
|
1" Check Valve
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
459337 |
1" Check Valve |
2 |
28.99 |
/ EA |
101-005NL |
|
|
3/4" Fip Stop Valve
B.K.'s Delphi import valve line is built to B.K.'s specifications. Entire valve is rated for maximum of 125 P.S.I. hot or cold. Works best in applications where valve will be frequently opened and closed or where valve is used for regulating flow. Import.Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
459202 |
3/4" Fip Stop Valve |
2 |
15.99 |
/ EA |
105-004NL |
|
|
1/2"fip Stop/waste Valve
Valve is rated for maximum of 125 psi hot or cold water. The waste opening allows the line to be drained on nonpressure side of the valve without removing valve from piping system. Refer to model No. 888-220RP for replacement waste cap and washer. Import.
View Details
|
459211 |
1/2"fip Stop/waste Valve |
1 |
14.79 |
/ EA |
105-103NL |
|
|
3/4"fip Stop/waste Valve
Valve is rated for maximum of 125 psi hot or cold water. The waste opening allows the line to be drained on nonpressure side of the valve without removing valve from piping system. Refer to model No. 888-220RP for replacement waste cap and washer. Import.
View Details
|
459220 |
3/4"fip Stop/waste Valve |
2 |
17.99 |
/ EA |
105-104NL |
|
|
1/2"swt Stop/waste Valve
Import valve line is built to B.K.'s specifications. Entire line is 100\% tested for quality. This valve is rated for maximum of 125 P.S.I. for use with hot and cold water. It is designed to work best in applications where valve will be frequently opened and closed or where valve is used for regulating flow or fluid passing through it. Import. Replacement waste cap and washer (sold separately).
View Details
|
459257 |
1/2"swt Stop/waste Valve |
4 |
11.99 |
/ EA |
105-603NL |
|
|
3/4"swt Stop/waste Valve
Import valve line is built to B.K.'s specifications. Entire line is 100\% tested for quality. This valve is rated for maximum of 125 P.S.I. for use with hot and cold water. It is designed to work best in applications where valve will be frequently opened and closed or where valve is used for regulating flow or fluid passing through it. Import. Replacement waste cap and washer (sold separately).
View Details
|
459266 |
3/4"swt Stop/waste Valve |
2 |
17.49 |
/ EA |
105-604NL |
|
|
1/2" Swt Ball Valve
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
459523 |
1/2" Swt Ball Valve |
15 |
15.49 |
/ EA |
107-453NL |
|
|
3/4" Swt Ball Valve
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
459514 |
3/4" Swt Ball Valve |
9 |
19.99 |
/ EA |
107-454NL |
|
|
1" Swt Ball Valve
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
459480 |
1" Swt Ball Valve |
1 |
27.99 |
/ EA |
107-455NL |
|
|
1/2 Cxc Waste Ball Valve
Forged brass. Chrome-plated ball. PTFE (polytetrafluoroethylene) seats, blowout proof stem. Vinyl grip and vibration proof locknut. Temperature range: -20 F (degree Fahrenheit) to 350 F. AGA (American Gas Association) certified for use with natural, manufactured, mixed, LP (liquified petroleum) gas, and LP gas/air mixtures up to 2 psi (pounds per square inch). Complies with federal specifications WW-V-35B. Type II, Style 3. Solder ends comply with ANSI (American National Standards Institute) B16.18. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
400340 |
1/2 Cxc Waste Ball Valve |
10 |
16.49 |
/ EA |
107-553NL |
|
|
3/4 Cxc Waste Ball Valve
Forged brass. Chrome-plated ball. PTFE (polytetrafluoroethylene) seats, blowout proof stem. Vinyl grip and vibration proof locknut. Temperature range: -20 F (degree Fahrenheit) to 350 F. AGA (American Gas Association) certified for use with natural, manufactured, mixed, LP (liquified petroleum) gas, and LP gas/air mixtures up to 2 psi (pounds per square inch). Complies with federal specifications WW-V-35B. Type II, Style 3. Solder ends comply with ANSI (American National Standards Institute) B16.18. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
400341 |
3/4 Cxc Waste Ball Valve |
9 |
22.99 |
/ EA |
107-554NL |
|
|
1" Cxc Waste Ball Valve ^
Forged brass. Chrome-plated ball. PTFE (polytetrafluoroethylene) seats, blowout proof stem. Vinyl grip and vibration proof locknut. Temperature range: -20 F (degree Fahrenheit) to 350 F. AGA (American Gas Association) certified for use with natural, manufactured, mixed, LP (liquified petroleum) gas, and LP gas/air mixtures up to 2 psi (pounds per square inch). Complies with federal specifications WW-V-35B. Type II, Style 3. Solder ends comply with ANSI (American National Standards Institute) B16.18. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
400342 |
1" Cxc Waste Ball Valve ^ |
4 |
35.99 |
/ EA |
107-555NL |
|
